Instruction Manual

Introduction to Cactus Technologies Industrial
Grade CF -3XX/-3XX-P1/-3XX-WP1 Series Products
01
503 Series Industrial Grade CompactFlash Card Product Manual v2.1Cactus Technologies
®
4
Product Specications
For all the following specications, values are dened at ambient temperature and nominal supply
voltage unless otherwise stated.
System Environmental Specications
2.1.
Table 2-1. Environmental Specications Cactus 503 Series CF Products
Temperature
Operating:
0° C to +70° C (Standard)
-45° C to +90° C (Extended)
Humidity
Operating & Non-Operating:
8% to 95%, non-condensing
Acoustic Noise
0 dB
Vibration
Operating & Non-Operating:
30 G peak to peak maximum
Shock
Operating & Non-Operating:
3,000 G maximum
Altitude
(relative to sea level)
Operating & Non-Operating:
100,000 feet maximum
System Power Requirements
2.2.
Table 2-2. Power Requirements Cactus 503 Series CF Products
DC Input Voltage (VCC)
100 mV max. ripple (p-p)
5.0V ±10%
(Maximum Average Value)
See Notes.
Sleep:
Reading:
Writing:
4 mA
165 mA
105 mA
NOTES: All values quoted are typical at ambient temperature and nominal supply voltage unless otherwise stated.
Sleep mode is specied under the condition that all card inputs are static CMOS levels and in a “Not Busy“ operating state.
Product
Specications02