Instruction Manual

503 Series Industrial Grade CompactFlash Card Product Manual v2.1Cactus Technologies
®
58
076h B5h
X
1
Mantissa
6h = 3.0
Exponent
5h = 1
Nominal Operation Supply
Voltage = 3.0V
Extension Byte Present
Nominal
Operation
Supply Voltage
078h 1Eh
X
0
1Eh +.30
Nominal
Operation
Supply Voltage
Extension Byte
07Ah 4Dh
X
0
Mantissa
9h = 4.5
Exponent
5h = 10
Max Average Current over 10
msec is 45mA
Max Average
Current
07Ch 1Bh CISTPL_CE Conguration Entry Tuple Tuple Code
07Eh 0Dh
Link to next tuple is 13 bytes.
Also limits size of this tuple to 15
bytes.
Link to next
tuple
080h C1h
I
1
D
1
Conguration Index
1
I/O Mapped Contiguous 16
registers conguration
Conguration Index for this
entry is 1. Interface Byte follows
this byte.
Default Conguration, so is not
dependent on previous Default
Conguration.
D:Default Conguration
I:Interface Byte Follows
TPCE_INDX
082h 41h
W
0
R
1
P
0
B
0
Interface Type
1
I/O Interface(1), Bvd’s and wProt
not used; Ready/-Busy active
but Wait not used for memory
cycles.
B:Battery Volt Detects Not Used
P:Write Protect Not Used
R:Ready/-Busy Used
W:Wait Used for Memory Cycles
TPCE_IF
084h 99h
M
1
MS
0
IR
1
IO
1
T
0
M: misc info present
MS: no memory space info
IR: Interrupt used
IO: I/O space used
T: No Timing info
Vcc Only Power
Descriptors; No
Timing; I/O and
IRQ present; No
Mem Space; Misc
Entry Present
P:Power info
type
T:Timing info
present
IO:I/O port info
present
IR:Interrupt info
present
MS:Mem space
info type
M:Misc info
byte(s) present