Instruction Manual
503 Series Industrial Grade CompactFlash Card Product Manual v2.1Cactus Technologies
®
17
Signal Name Dir. Description
WP
(CF Card Memory Mode)
Write Protect
O
Memory Mode—The CompactFlash Card does not have a write
protect switch. This signal is held low after the completion of the
reset initialization sequence.
-IOIS16
(CF Card I/O Mode)
I/O Operation—When the CompactFlash Card is congured for I/O
Operation, Pin 24 is used for the -I/O Selected is 16 Bit Port (-IOIS16)
function. A Low signal indicates that a 16 bit or odd byte only
operation can be performed at the addressed port.
-IOCS16
(True IDE Mode)
In True IDE Mode this output signal is asserted low when this device
is expecting a word data transfer cycle.
The following table denes all D.C. Characteristics for the CompactFlash Memory Card Series.
Unless otherwise stated, conditions are:
Vcc = 5V ± 10% or Vcc = 3.3V ± 10%
Ta = -45°C to 90°C
Electrical Specication
3.3.
Parameter Symbol MIN MAX Units
Storage Temperature
Ts
-65 +150 °C
Operating Temperature
T
A
-45 +90 °C
Vcc with respect to GND
Vcc
-0.3 6.5 V
3.3.1. Absolute Maximum Ratings