Owner's manual
503/503-P1 Series Industrial Grade SSD Product Manual v2.0Cactus Technologies
®
1
Features
• Solid state design with no moving parts
• Industry standard 2.5” IDE Drive form factor
• Supports ATA PIO Modes 0-6
• Supports MultiWord DMA Modes 0-4
• Supports UDMA Modes 0-6
• Supports ATA S.M.A.R.T. Feature Set
• Supports ATA Security Feature Set
• High reliability, MTBF > 4,000,000 hrs.
• Enhanced error correction, < 1 error in 10
14
bits read
• Intelligent power management to reduce
power consumption
• Dual voltage support: 3.3V/5.0V
Overview
Cactus Technologies Solid State
Drive(SSD) is a high capacity solid-state
ash memory product that complies
with the ANSI ATA standard and is
electrically compatible with an IDE disk
drive. Cactus Technologies SSDs provide
up to 128GB of formatted storage
capacity in 2.5”form factors.
Cactus Technologies Industrial Grade
SSD products use high quality ash
memory from well known vendors, such
as Toshiba Corporation. In addition, it
include an on-drive intelligent controller
that manages interface protocols, data
storage and retrieval as well as ECC,
defect handling and diagnostics, power
management, and clock control. The
controller’s rmware is upgradeable,
thus allowing feature enhancements and
rmware updates in the eld.
Introduction to Cactus Technologies
503 Series Industrial Grade
SSD Products01
Additional features for -503-P1 series
• CTLock™. This feature allows the card to be locked to a specic host.
• CTPurge™. This feature allows the host to securely erase the contents of the card using
procedures in published standards.
• CTWProt™. This feature allows for both software and hardware initiated write protect function.