Specifications

Manual Installation of Network Adapter
Drivers
17
For PCMCIA a/b/g/n Adapters
• <ADMInstallDir>\Driver\Moto5416\moto5416.inf on all operating systems.
These adapters include:
 CACE Technologies AirPcap N a/b/g/n Cardbus - Atheros 5416 based chipset
 AirMagnet® C1060 a/b/g/n Cardbus adapter - Atheros 5416 based chipset
For USB Adapters
• <ADMInstallDir>\Driver\MotoUSB\motousb.inf on all operating systems
These adapters include:
 AirPcap NX USB 802.11a/b/g/n adapter
 Proxim® ORiNOCO 8494 USB 802.11a/b/g/n adapter
 Ubiquiti SR71-USB 802.11a/b/g/n adapter
7. After selecting a driver setup file, click Open.
8. Click OK to install the driver. If a dialog window opens stating that the driver is unsigned,
select Continue Anyway.
9. When the driver installation is finished, open Mobile 6.1 to see if the driver error still exists.
If it does, you should re-install Mobile 6.1. Before re-installation of Mobile 6.1, uninstall the
existing version by accessing the Control Panel and selecting Add or Remove Programs.
On 64-bit Windows 7, the following drivers are installed when installing Mobile 6.1: PCADSp50.sys
and PCADMp50.sys. If your particular adapter was not installed during the Mobile 6.1 installation,
you must manually copy them from the <ADMInstallDir>\Driver folder (directory) to the
c:\WINDOWS\system32\drivers folder (directory). These drivers are required for proper operation of
Mobile 6.1 in 64-bit Windows 7.