User`s guide

13
TM
b2) Special Installation for Philips Models:
Insert the adapter parts (10) into the brackets provided for them on the
video / slide projector housing.
Use screws (17) to x the mounting arms (5).
Slide the mounting arms to the center of the video / slide
projector housing, and use M6 screws (7), and washers to attach
them to the video / slide projector bracket (2).
Tighten the screws.
b) Installation of Ceiling Bracket:
Use the ceiling plate (1) as template to mark 3 holes to be drilled in the
ceiling. Check, if water or gas pipes, or power lines are in the ceiling before
drilling!
Use a 8mm stone drill to bore the holes with a depth of 50mm. Insert one
dowel (15) into each of the drilled holes, use 3 screws (14), and washers
(16) to attach the ceiling plate (1) to the ceiling.
b1) Special Installation for Toshiba Models:
Use M4 screws (8) to connect the adapter parts (9) to the video / slide
projector.
Use screws (17) to x the mounting arms (5).
Slide the mounting arms to the center of the video / slide projector
housing, and use M6 screws (7), washers (11) and (16) to attach them to
the video / slide projector bracket (2).
Tighten the screws.