Cut Sheet
Plastic Device Covers attach to the front of receptacles,
switches or can be snapped onto empty mud rings to keep
them clean, dust free and finish ready during the taping and
painting process. The covers are replaced later with faceplates
at the trim out phase of construction.
PLASTIC DEVICE COVERS
PRODUCT
NO. (EA)
BOX SIZE / DEVICE TYPE
FASTENERS
INCLUDED
SINGLE GANG RECEPTACLE
THREE GANG RECEPTACLE
FOUR GANG RECEPTACLE
SINGLE GANG TOGGLE SWITCH
THREE GANG TOGGLE SWITCH
FOUR GANG TOGGLE SWITCH
SINGLE GANG PLASTER RING ONLY NONE
NONE
THREE GANG PLASTER RING ONLY NONE
FOUR GANG PLASTER RING ONLY NONE
NONE
DCP-1T
DCP-2
DCP-3R
PUSHWIRE CONNECTORS
PRODUCT NO. (EA) GANG COLOR
YELLOW
PC-4-OR 4 ORANGE
PURPLE
PC-8-GY 8 GRAY
GREEN
PC-8-GR 8 GREEN
Wire Size Range
PI-42-OR
PI-32-RD
PI-34-YL
PC-2-YL
PC-4-OR
PC-6-GR
All push style connectors used in FAS Power assemblies
conform to these standards:
Voltage Rating:
Current Rating: Matches the largest conductor used
Temperature Rating:
Adjustable Rings are useful in
installation where wall thicknesses
are unknown at the time of order or
electrical rough in.
Material: Galvanized steel.
AR-350
ADJUSTABLE RINGS
PRODUCT NO. (EA) DEVICE TYPE RAISE
SINGLE GANG
5
/
8
/
4
SINGLE GANG
3
/
4
/
TWO GANG
5
/
8
/
APR-3 THREE GANG
3
/
4
/
APR-R
3
/
4
/
SUPPORT ARMS
PRODUCT NO. (EA) WALL DEPTH
AR-300
AR-350 3
/
AR-400
AR-450 4
/
AR-500
AR-550 5
/
/
APR-2APR-1
APR-RAPR-3
IN-SURE
™
PUSHWIRE CONNECTORS
PRODUCT NO. (EA) GANG COLOR
ORANGE
PI-33-OR 3 ORANGE
PI-34-YL 4 YELLOW
Wire Size Range
3
Wire Size Range
In-Sure™ Push-In Wire Connectors features an easy-
grip design that combined with a low insertion force
makes repetitive electrical connections fast and easy. All
In-Sure wire connectors accept either stranded or solid
wires and include stainless steel inserts that restrict
PI-39-BL
Pushwire Connectors make the job of connecting
wires easier and more reliable than ever before.
Simply strip the wire, insert the conductor into
the connector and you have a solid connection.
The clear housing allows for visual inspection
to ensure the proper connection of stranded or
solid conductors. Integrated test ports allow for
circuit testing under an energized condition.
Support Arms attach to
the back of Floor, Wall, and
the assembly against the
wall behind the devices.
No attachment hardware is
required.
Material: Zinc-plated steel.
FAS Power Pre-fabricated Wiring Assemblies
Accessories — Covers & Adjustable Rings
Support Arms & Pushwire Connectors
10 11
www.legrand.us/cablofil
other accessories
other accessories