User Manual

TESTING AND TROUBLESHOOTING
4-2
3. Attach a crossed-over twisted pair segment (3)
between the two transceivers.
Figure 4-1 Installation Checkout
4. Select and run test 6, SERVER, on the LAN-MD
connected in step 1. Verify that:
• the status on the LAN-MD is 000 if SQE is on or
001 if SQE is off
•a PASS TEST STATUS LED is lit on the
LAN-MD
1
234
5
1. LAN-MD
2.TPT (directly attached to LAN-MD)
3.Twisted Pair Segment
4.TPT (directly attached to LAN-MD)
5.LAN-MD