User Manual

Configuring Simple Routing Policies
246 Enterasys X-Pedition User Reference Manual
redistributed by this command. If all direct routes are to be redistributed set the network parameter
to all. Note that the network parameter is a filter that is used to specify routes that are to be
redistributed.
To redistribute direct routes, enter one of the following commands in Configure mode:
Redistributing RIP into RIP
The XP routing process requires RIP redistribution into RIP if a protocol is redistributed into RIP.
To redistribute RIP into RIP, enter the following command in Configure mode:
Redistributing RIP into OSPF
RIP routes may be redistributed to OSPF.
To redistribute RIP into OSPF, enter the following command in Configure mode:
Redistributing OSPF to RIP
For the purposes of route redistribution and import-export policies, OSPF intra- and inter-area
routes are referred to as ospf routes, and external routes redistributed into OSPF are referred to as
ospf-ase routes. Examples of ospf-ase routes include static routes, rip routes, direct routes, bgp
routes, or aggregate routes, which are redistributed into an OSPF domain.
OSPF routes may be redistributed into RIP. To redistribute OSPF into RIP, enter the following
command in Configure mode:
To redistribute direct routes
into RIP.
ip-router policy redistribute from-proto direct to-proto rip
network all
To redistribute direct routes
into OSPF.
ip-router policy redistribute from-proto direct to-proto ospf
network all
To redistribute RIP into RIP.
ip-router policy redistribute from-proto rip to-proto rip
To redistribute RIP into OSPF.
ip-router policy redistribute from-proto rip to-proto ospf
To redistribute ospf-ase routes
into rip.
ip-router policy redistribute from-proto ospf-ase to-proto rip
To redistribute ospf routes into
rip.
ip-router policy redistribute from-proto ospf to-proto rip