Specifications

TRXI Events and Alarms
Event and Alarm Messages
4-12
TRXI
Management Module Guide
CsEvFormat/Event0042021a
{d “%w- %d %m-, %Y - %T”} -
STATION BURST ERRORS
THRESHOLD EXCEEDED - Device
{m} of type {t} reported that station {O
3} has exceeded the burst errors
threshold value of {I 1} within the
timebase value of {I 2}. (event [{e}])
No probable cause message
CsEvFormat/Event0042021b
{d “%w- %d %m-, %Y - %T”} -
STATION A/C ERRORS
THRESHOLD EXCEEDED - Device
{m} of type {t} reported that station {O
3} has exceeded the A/C errors
threshold value of {I 1} within the
timebase value of {I 2}. (event [{e}])
No probable cause message
CsEvFormat/Event0042021c
{d “%w- %d %m-, %Y - %T”} -
STATION RECEIVER CONGESTION
THRESHOLD EXCEEDED - Device
{m} of type {t} reported that station {O
3} has exceeded the receiver
congestion threshold value of {I 1}
within the timebase value of {I 2}.
(event [{e}])
No probable cause message
CsEvFormat/Event0042021d
{d “%w- %d %m-, %Y - %T”} -
STATION REMOVE FAILURE -
Device {m} of type {t} reported that
station {O 1} could not be removed
from the ring after three attempts.
(event [{e}])
No probable cause message
Table 4-1. TRXI Events and Alarms (Continued)
Message in the Event Log
Alarm View Probable Cause
Message