Specifications

9030992 E6 ConfigurationViews
3-25
Modify Allowed Station List View
Changing the Ring Security State
Changing the Ring Security State
To change the level of security on the ring, follow these steps:
1. Click on the desired security option.
2. Click on the Apply button, and then select OK in the confirmation
window.
If the new security state cannot be written to the device, a Cannot Update
error message appears. There may be a problem contacting the device, or the
firmware may not have updated, and you should click on the Read button
before attempting another update.
Adding Stations
To add stations to the view, follow these steps:
1. Click on the ADD button. A pop-up dialog box appears.
2. Enter the station address in the text entry field following the guidelines
described in the ADD Button description earlier in this section.
3. Select the option corresponding to the list you want to add the station to
(Allowed or Disallowed) and click on the Apply button.
If the new station cannot be written to the device, a Cannot Update error
message appears. There may be a problem contacting the device, or the
address you are trying to add to the station’s allowed list may already exist,
and you should click on the Read button before attempting another update.
Deleting Stations
To remove stations from the view, follow these steps:
1. Select the station address you want to remove (Refer to the CAUTION
earlier in this section).
2. Click on the DELETE button. For restrictions governing the deletion of
stations, refer to the DELETE Button description earlier in this section.
3. Click on the Apply button.