Specifications

Station Alarms Dialog Box
ConfigurationViews TRXI
3-20 Management Module Guide
Station Alarms Dialog Box
The Station Alarms dialog box allows you to read, display, and modify the
alarm settings for a single station or list of stations. The list displays the
stations that were on the ring at the time the dialog box was opened, however
you can read and modify the settings to a valid station that does not appear in
the list and was added after opening the view by entering its address in the
Station field. You can access this dialog box through the Station Alarms
button in the Token Ring Station Table view. The Station Alarms dialog box
provides the following information:
Station
The address of the current station. You can enter the address of a valid station
in this field to make it the current station.
Alarm
The threshold alarms that can be manipulated. The alarms in this column
include Line, Internal, Burst, A/C, and Congestion.
Threshold
The current setting for each corresponding alarm threshold. You can change
the values by selecting the field and editing the number.
State
The state of each corresponding alarm threshold (Enable or Disable).
Stations
The MAC addresses of all stations in the ring at the time the dialog box was
opened, except the current station, which is displayed in the Apply Settings to
list. Double-clicking on an address in this list moves it to the Apply Settings to
list.
Apply Settings to
The MAC addresses of all stations to which the threshold settings may be
applied. This list will always contain the current station’s MAC address upon
opening the dialog box. Double-clicking on an address in this list moves it to
the Stations list.
This button moves the selected item from the Stations list to the Apply
Settings to list.
This button moves the selected item from the Apply Settings to list to the
Stations list.
>
<