Specifications

9030992 E6 ConfigurationViews
3-17
Station Alarm Thresholds View
A/C
The current alarm threshold setting for address/copied errors on the device.
Internal
The current alarm threshold setting for internal errors on the device.
Congestions
The current alarm threshold setting for congestion errors on the device.
This button updates the contents of the Station Alarm Thresholds Table.
This button affects the display of the station addresses, toggling the format
between MAC (Physical) and Canonical (Ethernet). The button displays the
format NOT currently selected.
This button allows you to set a filter affecting the stations displayed in the
table. You select an attribute to filter against by clicking one of the column
heading buttons.
This button allows you to sort the stations displayed in the table. You select an
attribute to sort the table with by clicking one of the column heading buttons.
This button opens the Station Alarm States Table view, which provides the
same button functions and fields as the Alarms Thresholds view, but displays
information on the state of each alarm threshold (Enabled or Disabled).
This button opens the Station Detail view, which is described later in this
chapter.
This button opens the Station Alarms dialog box, which is described later in
this chapter.
This button allows you to remove the selected station from the ring.
Update
MAC/Canonical
Set/Clear Filter
Sort Up/Sort Down/Un-Sort
Alarm States Table
Station Detail
Station Alarms
Remove Station