Specifications

Ring Port Configuration View
ConfigurationViews TRXI
3-6 Management Module Guide
Port Status
The status of this station port.
Port Link Status
The status of the station port link. This value will only be Linked if the station
port detects a good phantom current.
Last Port Link Time
The time since the last station port link status change.
Port MAC Address
The MAC address of the attached station.
This button allows you to set the mapping of this port to a station as Enabled
or Disabled.
This button allows you to configure this station port to generate a trap when a
port is inserted or removed. Possible values are Enabled or Disabled.
Ring Port Configuration View
This view allows you to modify the values of some fields. You can access this
view through the Icon Subviews menu for the ring in and ring out icons in the
Device and DevTop views. This view provides the following information:
Module
The number of the module this ring port is on.
Port
The number of this ring port.
This button allows you to set this ring port to be Enabled or Disabled.
Port Status
The status of this ring port.
Port Class
Indicates whether this ring port has autowrapping capability.
This button allows you to select the port media used for this ring port as either
NotSelectable, STP, or Fiber.
Port-to-Station Mapping
Port Insertion Trap
Port Admin State
Port Media Select