Specifications

9030992 E6 ConfigurationViews
3-3
TRXI Device Configuration View
Host Configuration
Host Configuration
This section of the Device Configuration view provides the following
information pertaining to the configuration of the host:
This button allows you to send commands to the device by setting the correct
value. Possible commands are HardwareReset, SoftwareReset, Open, and
Close. The default value is NoOperation.
Open Status
The status of the device, or errors it has received, with respect to insertion
into the ring.
Error Report Timer
The time interval in which the host adapter reports errors to the ring error
monitor.
This button allows you to set or prohibit the possibility of the TRXI becoming
the active monitor for the ring by setting the proper Allowed or NotAllowed
status.
Host Error Status
This box in the Host Configuration section provides a series of read-only
indicator buttons detailing the last error status returned by the TRXI. For
information on the errors displayed, why they occurred, or how to rectify
them, refer to the TRXI Intelligent Hub User’s Manual.
This button opens the Ring Configuration view, which is described later in this
chapter.
This button opens the Security Configuration view, which is described later in
this chapter.
This button opens the Station Alarm Thresholds Table view, which is
described later in this chapter.
Commands
Active Monitor Contention
Ring Configuration
Ring Security
Alarms Table