Specifications

TRXI Device Configuration View
ConfigurationViews TRXI
3-2 Management Module Guide
TRXI Device Configuration View
The Device Configuration view provides information on the configuration of
the TRXI and allows you to modify the values of some fields. This view
provides the following information:
Ring Name
The ASCII name assigned to this ring. This name defaults to Network n,
where n is a unique integer value.
Ring Number
The number of the attached ring. If SPECTRUM cannot determine the
number of the ring, a zero is returned.
Ring Speed
The speed of the ring, which can have a value of 4 or 16 megabits.
Ring Status
The operational state of the ring.
Port Configuration
This section of the Device Configuration View provides the following
information pertaining to the configuration of the device itself:
Station Ports ON Out Of
Defines the total number of enabled station ports on the addressed board.
Ring Ports ON Out Of
The total number of enabled ring in/ring out ports in this port group.
This button allows you to enable all the station ports in this port group by
setting the value to Enable. The default value is NoEnable.
This button allows you to enable all the ring ports in this port group by setting
the value to Enable. The default value is NoEnable.
Enable All Station Ports
Enable All Ring Ports