Specifications

Logical Device Representation
Logical Ring In/Out Port Icons
Device View
2-10
TRXI
Management Module Guide
Logical Ring In/Out Port Icon Components
The Logical Ring In/Out Port icons consist of several areas providing
information pertaining to the ring in/out ports (refer to Figure 2-4). These
areas have the following functions:
Ring Label
Identifies the port as RI (Ring In) or RO (Ring Out).
Ring Port Status
The status of the ring in/out port, as follows:
ACT (Active) - Link, Port EnabledGreen
ACT (Active) - Link, Port DisabledBlue
WRAP - No Link, Port DisabledBlue
WRAP - No Link, Port EnabledRed
INIT (Initializing) Gray
Table 2-3. Ring In/Out Port Icon Menu Selections
Menu Selection Description
Close Closes the current window.
Navigate Opens the Navigator sub-menu, allowing you to
Navigate In or Up.
Alarms Opens the SPECTRUM Alarm View containing
alarms (if any) for the model.
Notes Opens the SPECTRUM Notes facility for the
device.
Utilities Opens the Utilities sub-menu, allowing you to
access utilities you have purchased for use with
SPECTRUM, such as SpectroGUARDIAN.
Port Notes Opens the SPECTRUM Notes facility for the port.
Port Configuration Opens the Port Configuration View for the
selected port.
Enable/Disable Ring In/Out Port Displays the Enable/Disable Ring In/Out Port
View, which allows you to toggle the selected Ring
In or Ring Out Port between enabled and disabled
states.