Specifications

Logical Device Representation
Logical Station Port Icons
Device View
2-8
TRXI
Management Module Guide
Logical Station Port Icon Components
The Logical Station Port icons consist of several areas providing information
pertaining to the station ports (refer to Figure 2-3). These areas have the
following functions:
Port Number
The specific number of this station port. Double-clicking on this zone opens
the Port Notes facility.
Port Status
The status of the station port, as follows:
INS (Inserted) Green
BYP (Bypassed) Blue
ENB (Enabled) Yellow
INIT (Initializing) Gray
Station Frames
Displays the current frame rate for the station on the port.
Station Errors
Displays the current error rate for the station on the port.
Table 2-2. Station Port Icon Menu Selections
Menu Selection Description
Close Closes the current window.
Navigate Opens the Navigator sub-menu, allowing you to Navigate In or
Up.
Alarms Opens the SPECTRUM Alarm View containing alarms (if any)
for the model.
Notes Opens the SPECTRUM Notes facility for the device.
Utilities Opens the Utilities sub-menu, allowing you to access utilities
you have purchased for use with SPECTRUM, such as
SpectroGUARDIAN.
Port Notes Opens the SPECTRUM Notes facility for the port.
Port Configuration Opens the Port Configuration View for the selected port.
Station Detail Opens the Ring Station Detail View for the station (if any)
connected to the selected port.
Enable/Disable
Station Port
Displays the Enable/Disable Station Port View, which allows you
to toggle the selected station port between enabled and disabled
states.