Technical data

9031251 E6 Event and Alarm Messages
4-11
TRBMIM Events and Alarms
CsEvFormat/Event0042020f
{d Ò%w- %d %m-, %Y - %TÓ} - PORT VIOLATION
CLEARED - Device {m} of Type {t} reported that
Port {I 2} in Module {I 1} has detected an Unlink
while the PortÕs Management State was Disabled.
- (event [{e}])
No probable cause message.
CsEvFormat/Event00420210
{d Ò%w- %d %m-, %Y - %TÓ} - FAULT RECOVERY
OSCILLATION - Device {m} of Type {t} reported
that the Ring is oscillating. - (event [{e}])
CsPCause/Prob00420210
FAULT RECOVERY OSCILLATION
SYMPTOMS:
The Ring is oscillating. Oscillation occurs when
the Ring fails a short time after recovery.
CsEvFormat/Event00420211
{d Ò%w- %d %m-, %Y - %TÓ} - RING PURGE
THRESHOLD EXCEEDED - Device {m} of Type
{t} reported that the Ring Purge Threshold Value
of {I 1} has been Exceeded within the Timebase
Value of {I 2}. - (event [{e}])
CsPCause/Prob00420211
RING PURGE THRESHOLD EXCEEDED
SYMPTOMS:
The Ring Purge Threshold Value has been
Exceeded. A Ring Purge is used to make the Ring
return to a normal condition.
PROBABLE CAUSE:
An Active Monitor will initiate the Ring Purge
process when:
1) A Token Error condition is detected by the
Active Monitor.
2) An adapter becomes the Active Monitor in the
Monitor Contention Process.
Table 4-1. TRBMIM Events and Alarms (Sheet 10 of 23)
System Event Log Message
Source and Text
Alarm View Probable Cause Message
Source and Text