Technical data

9031251 E6 Event and Alarm Messages
4-9
TRBMIM Events and Alarms
CsEvFormat/Event0042020b
{d Ò%w- %d %m-, %Y - %TÓ} - RING
CONFIGURATION CHANGED - Device {m} of
Type {t} reported that its Ring ConÞguration has
changed. - (event [{e}])
No probable cause message.
CsEvFormat/Event0042020c
{d Ò%w- %d %m-, %Y - %TÓ} - PORT REMOVED
DURING FAULT RECOVERY - Device {m} of
Type {t} reported that Port {I 1} in Module {I 2}
was Removed from the Ring during a Fault
Recovery Condition. - (event [{e}])
CsPCause/Prob0042020c
PORT REMOVED DURING FAULT RECOVERY
SYMPTOMS:
A Port was Removed from the Ring during a Fault
Recovery Condition.
PROBABLE CAUSES:
1) Bad cable connected to Removed Port.
2) Device connection is bad at other end of the
cable.
RECOMMENDED ACTIONS:
1) Check cable connected to Removed Port.
2) Check Device connection at other end of the
cable.
3) After problem is resolved, Enable the Removed
Port.
Table 4-1. TRBMIM Events and Alarms (Sheet 8 of 23)
System Event Log Message
Source and Text
Alarm View Probable Cause Message
Source and Text