Technical data

9031251 E6 Event and Alarm Messages
4-7
TRBMIM Events and Alarms
CsEvFormat/Event00420205
{d Ò%w- %d %m-, %Y - %TÓ} - RING PORT
FAULTED - Device {m} of Type {t} reported that
Ring Port {I 2} in Module {I 1} has entered the
Wrapped State while its Management State was
Enabled. - (event [{e}])
CsPCause/Prob00420205
RING PORT FAULTED
SYMPTOMS:
A Ring Port has entered the Wrapped State while
its Management State was Enabled.
PROBABLE CAUSES:
1) Bad cable connected to affected Port.
2) Device is down at other end of the cable.
3) Device connection is bad at other end of the
cable.
RECOMMENDED ACTIONS:
1) Check cable connected to affected Port.
2) Power up Device at other end of the cable.
3) Check Device connection at other end of the
cable.
CsEvFormat/Event00420206
{d Ò%w- %d %m-, %Y - %TÓ} - RING PORT FAULT
CLEARED - Device {m} of Type {t} reported that
Ring Port {I 2} in Module {I 1} has left the
Wrapped State. - (event [{e}])
No probable cause message.
Table 4-1. TRBMIM Events and Alarms (Sheet 6 of 23)
System Event Log Message
Source and Text
Alarm View Probable Cause Message
Source and Text