Technical data

TRBMIM Events and Alarms
Event and Alarm Messages TRBMIM
4-6 Management Module Guide
CsEvFormat/Event00420136
{d Ò%w- %d %m-, %Y - %TÓ} - MODULE
INSERTION - Device {m} of Type {t} reported that
a Module has been Inserted into Slot {I 1}. -
(event [{e}])
CsPCause/Prob00420136
MODULE INSERTION
SYMPTOMS:
A Module has been Inserted into this Chassis.
CsEvFormat/Event00420201
{d Ò%w- %d %m-, %Y - %TÓ} - PORT INSERTED -
Device {m} of Type {t} reported that a Station has
been Inserted into Port {I 2} in Module {I 1}.-
(event [{e}])
No probable cause message.
CsEvFormat/Event00420202
{d Ò%w- %d %m-, %Y - %TÓ} - PORT
DEINSERTED - Device {m} of Type {t} reported
that a Station has been DeInserted from Port {I 2}
in Module {I 1}. - (event [{e}])
No probable cause message.
CsEvFormat/Event00420203
{d Ò%w- %d %m-, %Y - %TÓ} - RING SPEED
FAULT - Device {m} of Type {t} reported that
Module {I 1} has entered the Ring Speed Fault
State. - (event [{e}])
CsPCause/Prob00420203
RING SPEED FAULT
SYMPTOMS:
A Token Ring Module has entered the Ring Speed
Fault State.
PROBABLE CAUSES:
1) A Station or Ring Port attaching with a
different speed than this Module is conÞgured for.
RECOMMENDED ACTIONS:
1) Detach the Station or Ring Port from the
Module.
2) Re-conÞgure the Station or Ring Port speed to
match the speed of the affected Module.
3) Re-attach the Station or Ring Port to the
Module.
CsEvFormat/Event00420204
{d Ò%w- %d %m-, %Y - %TÓ} - RING SPEED
FAULT CLEARED - Device {m} of Type {t}
reported that Module {I 1} has left the Ring Speed
Fault State. - (event [{e}])
No probable cause message.
Table 4-1. TRBMIM Events and Alarms (Sheet 5 of 23)
System Event Log Message
Source and Text
Alarm View Probable Cause Message
Source and Text