Technical data

Token Ring Station Table Views
Station Alarms Dialog Box
ConÞguration & Station Table Views TRBMIM
3-42 Management Module Guide
The > button moves the selected item from the Stations list to the Apply
Settings to list.
The < button moves the selected item from the Apply Settings to list to the
Stations list.
The >> button moves all of the stations from the Stations list to the Apply
Settings to list. The current station remains at the top of the Apply Settings
to list if it is a valid station.
The << button moves all of the stations from the Apply Settings to list to the
Stations list. The current station remains at the top of the Apply Settings to
list if it is a valid station.
The Apply button applies the threshold settings to the stations listed in the
Apply Settings to list Ñ or to the station currently identiÞed in the Station
Þeld if that list is empty.
The Read button initiates a read of the threshold settings for the selected
station Ñ or to the station currently identiÞed in the Station Þeld if that list
is empty.
The Cancel button lets you exit from the dialog box; this exit does no0t affect
the conditioin of any stations, which are directed to accept any value
modiÞcations ohly when you click on the Apply button.
Modifying Threshold Settings
To change the threshold settings for one or more stations, proceed as follows:
1. Move the addresses of all the stations to be modiÞed to the Apply
Settings to list. If you are only modifying the current station, as
identiÞed in the Station Þeld, this step is not necessary. If you wish to
modify a valid station that does not appear in the Apply Settings to list,
enter the MAC address of that station into the Station Þeld. For
>
<
>>
<<
Apply
Read
Cancel