Technical data

Token Ring Station Table Views
Station Alarms Dialog Box
ConÞguration & Station Table Views TRBMIM
3-40 Management Module Guide
Below each of these pie charts, there is a set of three mutually exclusive
buttons (Total, Delta, and Accum); whichever button you select determines
the way in which the data is represented for that pie chart. A separate Clear
button in that same area works in conjunction with the Accum button. For
more information on the use of these buttons, refer to the SPECTRUM GIB
Editor Guide.
Station Alarms Dialog Box
Opening the Station Alarms Dialog Box
To open the Station Alarms dialog box for any desired station in the token ring
network, highlight the line entry pertaining to that station in any of the
Table 3-6. Information in Isolating Errors Pie Chart
Statistic DeÞnition
Line The total number of line errors that have occurred on this ring.
Burst The total number of burst errors that have occurred on this ring.
A/C The total number of address/copied errors that have occurred on
this ring.
Abort
Sequence
The total number of abort sequences transmitted on this ring.
Internal The total number of internal errors that have been detected by
any station on this ring.
Table 3-7. Information in Non-Isolating Errors Pie Chart
Statistic DeÞnition
Lost Frames The total number of times a station has had its TRR timer expire
while trying to transmit.
Congestions The total number of times a station recognizes a frame addressed
to it, but has no available buffer space.
Frame Copied The total number of times a station recognizes a frame addressed
to it, and detects that the FS Þeld A bits are set to 1.
Token The total number of times the station acting as active monitor
recognizes an error condition requiring a token be transmitted.
Frequency The total number of frequency errors on this ring.