Technical data

Token Ring Station Table Views
Token Ring Station Isolating Errors Table View
ConÞguration & Station Table Views TRBMIM
3-32 Management Module Guide
The Remove Station button opens the Remove Station dialog box, which lets
you remove the selected station (whichever station is associated with the
address entry that was highlighted when this button was selected) from the
ring. The Remove Station dialog box asks if you wish to remove the designated
station from the ring and provides only two choices: Yes or No. Selecting the
Yes button removes the addressed station from the ring and exits from the
dialog box; selection of the No button simply exits from the dialog box without
making any change to the ring.
Finally, two selection buttons located just above the blocked-off Station Table
area provide respective access to other table views, each of which then leads to
another view:
The Isolating Errors Table button opens the Token Ring Station Isolating
Errors Table view, which is described in Token Ring Station Isolating Errors
Table View, starting on page 3-32. That view in turn gives access to the Token
Ring Station Non-Isolating Errors Table view, which is described in Token
Ring Non-Isolating Errors Table View, starting on page 3-34.
The Alarms Table button opens the Token Ring Station Alarm Thresholds
view, which is described in Token Ring Station Alarm Thresholds View,
starting on page 3-35. That view in turn gives access to the Token Ring
Station Alarm States view, which is described on page 3-37.
Token Ring Station Isolating Errors Table View
The Token Ring Station Isolating Errors Table view displays an Isolating
Errors Table containing information for all stations directly connected to the
TRBMIM device, buttons to manipulate the information in the table, and
buttons to access other views.
Opening the Token Ring Isolating Errors Table View
You can access the Token Ring Station Isolating Errors view by clicking on the
Isolating Errors button in the Token Ring Station Table view (refer to Token
Ring Station Table Views, starting on page 3-28). Alternatively, you can
highlight either the CtTokenRingApp icon or the HubCSITR icon in the
Applications view and then select the Station Errors option from the device
menu (if using the right mouse button) or by pulling down the File menu from
the menu bar and selecting the File > Icon Subviews > Station Errors
option if using the left mouse button.
Remove Station
Isolating Errors Table
Alarms Table