Technical data

Other ConÞguration Views
Modify Allowed Station List Dialog Box
ConÞguration & Station Table Views TRBMIM
3-24 Management Module Guide
active to indicate that the station has recently been moved to the Disallowed
Stations list, with the condition remaining in effect until you click on the
Apply button to implement the change(s). You cannot move a station from the
Allowed Stations window if its security is set to Enable with Alarm.
Highlighting any station address entry in the Disallowed Stations list and
then clicking on the < button will move the selected station from the
Disallowed Stations list to the Allowed Stations list. The < symbol on the
button will remain active until the change is applied when you subsequently
click on the Apply button.
The ADD button lets you add a new station. The station address must be
added in valid hex MAC address format, using valid separators Ñ the colon (:),
period (.), and dash (-). You can add the new station either to the Allowed
Stations scroll list or to the Disallowed Station scroll list by selecting the
appropriate option in the Add Station to List dialog box that appears when
you click on the ADD button. That secondary dialog box provides an entry
Þeld for identiÞcation of the address for the new station, provides a mutually
exclusive selection between Allowed List and Disallowed List options, and
then lets you make a Þnal choice between Apply (which adds the entered
station address to the designated list) or Cancel (which exits from the
secondary dialog box without effecting any changes). Any recently added
station address will be accompanied by a ÒplusÓ symbol (+), which will remain
in effect until the addition is Þnalized by clicking on the Apply button in the
Modify Allowed Station List dialog box. Selecting a recently added that is
marked with a + symbol and then clicking on the DELETE button will
remove it from the scroll list.
The DELETE button lets you remove the selected station (Refer to the
CAUTION note at the beginning of this section). You may remove any station
address except that address belonging to the bridging device itself, and except
for any station in the Allowed Stations scroll list that currently is set for an
Enable with Alarm security state. A minus symbol (-) accompanying an
address entry in either scroll list indicates that the station has been marked
for removal, and this symbol will remain in effect until the changes are
Þnalized by subsequent clicking on the Apply button, at which time the
station is actually removed from the scroll list. Selecting the station and
clicking on the ADD button will remove the minus symbol and unmark the
station for removal. This button will also remove a recently added station
marked with the + symbol.
The Delete All Allowed Stations button lets you remove all of the stations
in the Allowed Stations scroll list (Refer to the CAUTION at the beginning of
<
ADD
DELETE
Delete All Allowed Stations