Technical data

Other ConÞguration Views
Token Ring Security ConÞguration View
ConÞguration & Station Table Views TRBMIM
3-20 Management Module Guide
Token Errors Ð The threshold Þeld lets you set a value for the Token Errors
alarm threshold. The associated state button lets you Enable or Disable
detection of this alarm.
Beacon State Ð The threshold Þeld lets you set a value for the Beacon State
alarm threshold. The associated state button lets you Enable or Disable
detection of this alarm.
Frame Count Ð The threshold Þeld lets you set a value for the Frame Count
alarm threshold. The associated state button lets you Enable or Disable
detection of this alarm.
One Þnal Þeld at the bottom of this view, Ring Timebase, lets you set the
timebase for getting and setting all alarms for this ring. This value is
measured in seconds.
Token Ring Security ConÞguration View
Opening the Token Ring Security ConÞguration View
Clicking on the Ring Security button in the Token Ring ConÞguration view
(see Figure 3-5 on page 3-17) opens the Token Ring Security ConÞguration
view.
Token Ring Security ConÞguration View Details
The Token Ring Security ConÞguration view provides information about the
security conÞguration for the ring and lets you modify the values of some
Þelds. You can modify the values of the Þelds having labels that are displayed
in this view in bold print.
A highlighted bar across the top of the views provides the following four
readout Þelds:
Ring Name Ð The ASCII name assigned to this ring. This name defaults to
Network n, where n is a unique integer value.
Ring Number Ð The number of the attached ring. If SPECTRUM cannot
determine the number of the ring, a zero is returned.
Ring Status Ð The operational state of the ring.
Ring Speed Ð The speed of the ring, which can have a value of 4 or 16
megabits.