Technical data

Other ConÞguration Views
Token Ring Ring ConÞguration View
ConÞguration & Station Table Views TRBMIM
3-18 Management Module Guide
This button lets you enable all ring ports in this port group by setting the
value to Enable. The default value is NoEnable.
In addition, three push-buttons on the right-hand side of the Port
ConÞguration area provide access to three other important views:
Clicking on this button opens the Token Ring Ring ConÞguration view./ For
further information on that view, refer to Token Ring Ring ConÞguration View,
starting on page 3-18.
Clicking on this button opens the Token Ring Security ConÞguration view. For
further information on that view, refer to Token Ring Security ConÞguration
View, starting on page 3-20.
Clicking on this button opens the Token Ring Station Alarm Thresholds Table
view. For further information on that view, refer to Token Ring Station Alarm
Thresholds View, starting on page 3-35.
Token Ring Ring ConÞguration View
Opening the Token Ring Ring ConÞguration View
Clicking on the Ring ConÞguration button in the Token Ring ConÞguration
view (see Figure 3-5 on page 3-17) opens the Token Ring Ring ConÞguration
view. In addition to the general conÞguration information common to most
generic views, enclosed within the status border in the top part of the view,
this view provides information about the conÞguration of the associated token
ring network(s), including several elements of possible alarms concerned with
the ring, together with push-buttons associated with some of these elements.
You can modify the values of the Þelds that are displayed in this view in bold
print.
Token Ring Ring ConÞguration View Details
The Ring ConÞguration section, located on the left side of the Token Ring
Ring ConÞguration view, displays the following information:
Enable All Ring Ports
– Ring Configuration –
– Ring Security –
– Alarms Table –