Technical data

9031251 E6 ConÞguration & Station Table Views
3-17
Other ConÞguration Views
Token Ring ConÞguration View
Figure 3-5. Cabletron Token Ring ConÞguration View
Ring Name Ð The ASCII name assigned to this ring. This name defaults to
Network n, where n is a unique integer value.
Ring Number Ð The number of the attached ring. If SPECTRUM cannot
determine the number of the ring, a zero is returned.
Ring Speed Ð The speed of the ring, which can have a value of 4 or 16
megabits.
Ring Status Ð The operational state of the ring. Depending on the current
general operational state of the ring, this value will be any one of Normal,
Closed, Purge, Contention, Beaconing, Lobe Fail, or Unknown.
Directly below the just-described row of readouts, a Port ConÞguration
block presents the following information and controls pertaining to the
conÞguration of the device ports:
Station Ports ON Out Of Ð DeÞnes the total number of enabled station
ports on the addressed module.
Ring Ports ON Out Of Ð The total number of enabled ring-in/ring-out ports
in this port group.
This button lets you enable all station ports in this port group by setting the
value to Enable. The default value is NoEnable.
Primary Landscape 0x00400000 - VNM Host - MMAC Plus of type BdgCSITRBMs
System Up Time
Manufacturer
Device Type
Serial Number
12+04:22:41
Cabletron Systems
TRBM
Network 1
134.141.68.94
Gen Bridge App
Primary Application
Network Address
Cabletron TRBMIM Revision 2.01.10
Name
Contact
Description
Location
File View
*
Help ?
Cabletron Token Ring Configuration View
Ring Configuration
Port Configuration
Ring Security
Alarm Table
––
––
––
0 Station Ports ON Out of 0 Enable All Station Ports
NoEnable
0 Ring Ports ON Out of 0 Enable All Ring Ports
NoEnable
Ring Name Network 1 Ring Number 1 Ring Speed 16MBits Ring Status Normal
Enable All Station Ports