Technical data

9031251 E6 ConÞguration & Station Table Views
3-5
Device ConÞguration View
TRBMIM Device ConÞguration View Details
as described below. Once you select any one of these four mutually-exclusive
category selectors, it remains active until you select one of the other three
category buttons.
The upper left corner of the Interface ConÞguration Table contains an
Update button. Click on this button to update the information being
presented in the Interface ConÞguration Table readouts.
The MAC button to the right of the Update button in the upper left corner of
the Interface ConÞguration Table is an address-format button lets you
alternate the format of the interface address between MAC (default) and
Canonical settings.
The upper right corner of the Interface ConÞguration Table contains a sorting-
speciÞcation button, which lets you determine the sorting sequence for the
token-ring ports displayed in the table. This button is not active until after
one of the four column-selector category switches across the top of the table
listing has been selected (that is, any one of the Interface Address,
Description, Type, or Operational Status selection buttons, as described
in Table 3-1). When the Sort Up button is active, clicking this button lets you
select between Sort Up (default), Sort Down, and Un-Sort sequences for
those listed entries, based on whichever column category concurrently is
selected. Once any of these sorting options is chosen, it remains in effect until
a later change is made.
Located just to the left of the sorting-speciÞcation button in the upper right
center of the Interface ConÞguration Table, the Þlter-setup button lets you
alternate between two states: Set Filter (default) and Clear Filter. As with
the sort-function button, this button is not active until after one of the four
category switches across the top of the table listing has been selected. If you
select the Set Filter option, indicating that you want to establish a mask to
reject entries containing whatever elements you specify, the program then
activates a dialog box asking you to enter the applicable information
pertaining to whichever column category concurrently is selected. Once either
setting is chosen, it remains in effect until a later change is made.
Update
MAC
Sort Up
Set Filter