Technical data

Device ConÞguration View
TRBMIM Device ConÞguration View Details
ConÞguration & Station Table Views TRBMIM
3-4 Management Module Guide
Bridge Management Ð SpeciÞes whether the mode is Bridging-Only or
Bridging and Management. When the indication reads Mgmt_Enabled, the
TRBMIM is set for Bridging and Management and will manage the higher-
numbered boards in the hub (as displayed to its left in the Logical Device
view; see Figure 2-4 on page 2-9), up to the next intelligent MIM (which in
turn will manage the devices above itself). When the indication reads
Mgmt_Disabled, the TRBMIM is set for Bridging-Only mode and will not
manage any devices.
Figure 3-1. TRBMIM Device ConÞguration View
Interface ConÞguration Table Ð The lower half of the Device
ConÞguration View displays a multi-function Interface ConÞguration Table,
enclosed within a white border. This table lists each token-ring port and
displays the applicable Interface Address, Description, Type, and Operational
Status entries for each such port, as listed in Table 3-1. Selection buttons at
the top of each respective category column let you determine the category of
interest before you set Þlter conditions or sorting sequence for the listed ports,
Primary Landscape 0x00400000 - VNM Host - MMAC Plus of type BdgCSITRBMs
System Up Time
Manufacturer
Device Type
Serial Number
57+17:22:51
Cabletron Systems
TRBM
134.141.68.94
134.141.68.94
Gen Bridge App
Primary Application
Network Address
Cabletron TRBMIM Revision 2.01.10
Model Name
Contact
Description
Location
File View
*
Help ?
Device Configuration View
Firmware Revision Hardware Revision 42.01.10 Bridge Management Mgmt_Enabled
Update MAC Interface Configuration Table
Set Filter
Sort UP
Interface Address Description Type Operational Status
00:00:B8:40:27:62 TokenRing0
iso88025-tokenRing
On
00:00:B8:40:27:E2 TokenRing1
iso88025-tokenRing
On
1
2
On
iso88025-tokenRing
TokenRing0
00:00:B8:40:27:62
–Interface Detail–
Component Table Download Application Trap Table