Technical data

Accessing the Logical Device View
Ring Management Icon
Device View TRBMIM
2-18 Management Module Guide
would get if you were to click on that same icon and then select Icon
Subviews from the View menu. To access the Ring Management menu,
position the cursor on the Ring Management Icon and depress the right mouse
button to display the menu, then slide the cursor down to the desired option
and release the mouse button. Alternatively, you can click in that same icon
area and then select the View > Icon Subviews option. In addition, you can
also access these same subviews by clicking on the HubCSITR icon in the
Application view and then either selecting the Icon Subviews option from the
View menu or else holding down the right mouse button while the cursor is on
that HubCSITR icon. The list of options obtained thereby also provides access
to the DevTop view, as well as the ones accessible from the Logical Device
view.
Figure 2-9 provides a breakdown of the Ring Management Icon, its applicable
double-click zone, and the Ring menu selections. Table 2-5 provides deÞnitions
of the associated Ring Management menu selections.
Ring Management Icon Component
The Ring Management Icon (refer to Figure 2-9) consists of three areas
providing information pertaining to the ring ports. These areas have the
following functions:
Station Port Network Label Ð The Station Port Network Label identiÞes
the port-connected devices as a management ring.