Technical data

9031251 E6 Device View

2-15

Accessing the Logical Device View

Logical Port Icons

The Logical Port Icons have speciÞc double-click zones and a device-related

pop-up port device menu, which is the same menu you would get if you were to

click on that same Logical Port Icon and then select Icon Subviews from the

View menu. To access the port device menu, depress the right mouse button

while the cursor is on the Logical Device Icon to bring up the menu, slide the

cursor down to the desired option, and then release the mouse button.

Alternatively, you can click on the Logical Port Icon zone and then select the

View > Icon Subviews option from the menubar. All of these subviews can also

be accessed from the DevTop View.

Figure 2-8 provides a breakdown of the Logical Port Icon and the associated

port device menu selections. Table 2-3 provides deÞnitions of the port device

menu selections.

Table 2-2. Device Menu Selections Accessible from Bridging Performance

Access Label

Menu Selection Description

Close Closes the Logical Device view.

Navigate Opens the Navigator submenu, allowing you to

Navigate In or Up. For more information on the

Navigator sub-menu, refer to Chapter 4 in the

SPECTRUM Views reference.

Alarms Opens the Alarms view, which identiÞes alarms (if

any) for the model.

Performance Opens the Performance view for the TRBMIM

model.

Notes... Opens the SPECTRUM Notes facility for the device.

Utilities Opens the Utilities submenu, allowing you to access

any SPMA or other non-core utilities you have

purchased for SPECTRUM.

Source Route ConÞguration Opens the Source Route Bridge ConÞguration Table

for this device. For further information on this view

and its related views, refer to Source Route Port

ConÞguration View, starting on page 3-11.

Source Route Statistics Opens the Source Route Bridge Statistics Table for

this device.

Spanning Tree Opens the Spanning Tree Information view.