Technical data

Accessing the Logical Device View
Logical Device Icon
Device View TRBMIM
2-10 Management Module Guide
Logical Device Icon
The TRBMIM Logical Device Application Icon displayed in the Logical Device
view (refer to Figure 2-3 or Figure 2-4) has speciÞc double-click zones that
provide access to speciÞc views, as designated by the left-side captions in
Figure 2-5. In addition, as designated by the right-side captions in that same
Þgure, right-clicking in each of the different areas in the Logical Device
Application Icon provides access to device menus pertaining to the given area.
These device menus provide the same access paths given by the View > Icon
Subviews menu when the associated area is highlighted.
To access these device menus, move the cursor to the desired icon and click the
right mouse button. This causes the system to display a duplicate copy of the
File > Icon Subviews menu as a pop-up menu that remains on display only
so long as you hold your right mouse button depressed. While this device
menu selection is on display, you can slide the cursor down through the listed
options; whichever option currently is covered by the cursor when you release
the button becomes selected. (Alternatively, you can click the left mouse
button on the same icon area and then pull down the View menu from the
Logical Device view menu bar and select its Icon Subviews option. The
resulting steady-state menu remains on display until you move the cursor to
one of its options and click the left mouse button.)
Figure 2-6 provides a breakdown of the Logical Device Icon for the TRBMIM,
its double-click zones, and the associated device menu selections. Table 2-1
provides deÞnitions of the different device menu selections.