Technical data

Logical Device Representation
Device View TRBMIM
2-6 Management Module Guide
Logical Device Representation
Instead of presenting a physical image of the TRBMIM, the Logical Device
View representation provides gauges and information about the device, the
modules it manages, and their station and ring ports. Figure 2-3 on page 2-8
shows a representation of a TRBMIM Logical Device View with Bridging-Only
capabilities. Figure 2-4 on page 2-9 shows a representation of a TRBMIM
Logical Device view with Bridging-and-Management capabilities, with this
view therefore including the associated cards and their respective logical
station port icons.
In both cases, the logical representation of the TRBMIM module shown in the
lower portion of the Device view is divided into different areas, as identiÞed by
the captions in these views. The Device Icon area at the top of the module
representation presents information about the device. The Bridging Icon
identiÞes the function of the module. The Logical Port Icon area presents
information about the station and the FNB ports. Finally, the Ring
Management Icon area (present only in Bridging-and-Management mode)
presents information about the Ring ports.
Accessing the Logical Device View
You can access the Logical Device view through any of the following methods:
1. Double-click on the Device view button of the TRBMIM device icon, as
shown below. This action will open up whichever Device view was last
opened for that device (i.e., Logical or Physical).
Location View Icon
Topology View Icon
Device View Button