Technical data

9031251 E6 Introduction
1-3
Supported Firmware Revisions
- Static (Static_App)
¥ MIB-II (SNMP2_Agent)
- IP (IP2_App)
- System (System2_App)
- ICMP (ICMP_App)
- UDP (UDP2_App)
¥ Download App (CtDownLoadApp)
The TRBMIM Management Module also supports RMON and DLM, and
SPECTRUM management of these MIBs may be purchased separately. Refer
to the documentation provided with the RMON and DLM management
modules for descriptions of these capabilities. The following chapters explain
how to use SPECTRUM and the management module software to monitor and
manage a TRBMIM Management Module.
Supported Firmware Revisions
You should create the TRBMIM model using the Model Type Name that
corresponds to the Þrmware revision of your TRBMIM. For the BdgCSITRBM,
the Þrmware revision is 2.00.00 or higher. Firmware versions 1.00 and 1.01
provide only Bridge-Only support.)
SPMA and the TRBMIM
The TRBMIM Management Module provides direct access via button
selections from the Device ConÞguration View to two SPMA (SPECTRUM
Portable Management Applications) tools, as discussed on page 3-7 (see
Download Application and Trap Table ). Additional SPMA application can be
accessed by selecting the Applications option on the Utilities selection on the
Icon Subviews menu. To open the SPMA Applications menu from any
SPECTRUM view, do the following:
1. Select TRBMIM model.
2. Select Icon Subviews from the View menu.
3. Select Utilities from the Icon Subviews menu.
NOTE
If there is an Uninterruptible Power Supply (UPS) inline with your system,
CtUPS_App will appear as a major software application.