Technical data

TRBMIM Events and Alarms
Event and Alarm Messages TRBMIM
4-20 Management Module Guide
CsEvFormat/Event0042022f
{d Ò%w- %d %m-, %Y - %TÓ} - PORT VIOLATION
- Device {m} of Type {t} reported that Board {I 1},
Port Group {I 2}, Port {I 3} has detected a Link
while the PortÕs Management State was Disabled.
- (event [{e}])
No probable cause message.
CsEvFormat/Event00420230
{d Ò%w- %d %m-, %Y - %TÓ} - PORT VIOLATION
CLEARED - Device {m} of Type {t} reported that
Board {I 1}, Port Group {I 2} in Port {I 3} has
detected an Unlink while the PortÕs Management
State was Disabled. - (event [{e}])
No probable cause message.
CsEvFormat/Event00420231
{d Ò%w- %d %m-, %Y - %TÓ} - RING PURGE
THRESHOLD EXCEEDED - Device {m} of Type
{t} reported that the Ring Purge Threshold Value
of {I 2} has been Exceeded within the Timebase
Value of {I 3} for Ring {I 1}. - (event [{e}])
CsPCause/Prob00420231
RING PURGE THRESHOLD EXCEEDED
SYMPTOMS:
The Ring Purge Threshold Value has been
Exceeded. A Ring Purge is used to make the Ring
return to a normal condition.
PROBABLE CAUSE:
An Active Monitor will initiate the Ring Purge
process when:
1) A Token Error condition is detected by the
Active Monitor.
2) An adapter becomes the Active Monitor in the
Monitor Contention Process.
Table 4-1. TRBMIM Events and Alarms (Sheet 19 of 23)
System Event Log Message
Source and Text
Alarm View Probable Cause Message
Source and Text