Technical data

9031251 E6 Event and Alarm Messages
4-15
TRBMIM Events and Alarms
CsEvFormat/Event0042021e
{d Ò%w- %d %m-, %Y - %TÓ} - RING SPEED
FAULT - Device {m} of Type {t} reported that
Module {I 1}, Port {I 2} has entered the Ring
Speed Fault State. - (event [{e}])
CsPCause/Prob0042021e
RING SPEED FAULT
SYMPTOMS:
A Token Ring Module has entered the Ring Speed
Fault State.
PROBABLE CAUSES:
A Station or Ring Port attaching with a different
speed than this Module is conÞgured for.
RECOMMENDED ACTIONS:
1) Detach the Station or Ring Port from the
Module.
2) Re-conÞgure the Station or Ring Port speed to
match the speed of the affected Module.
3) Re-attach the Station or Ring Port to the
Module.
CsEvFormat/Event0042021f
{d Ò%w- %d %m-, %Y - %TÓ} - RING SPEED
FAULT CLEARED - Device {m} of Type {t}
reported that Module {I 1}, Port {I 2} has left the
Ring Speed Fault State. - (event [{e}])
No probable cause message.
CsEvFormat/Event00420220
{d Ò%w- %d %m-, %Y - %TÓ} - PORT INSERTED -
Device {m} of Type {t} reported that a Station has
been Inserted into Board {I 1}, Port Group {I 2},
Port {I 3}. - (event [{e}])
No probable cause message.
CsEvFormat/Event00420221
{d Ò%w- %d %m-, %Y - %TÓ} - PORT
DEINSERTED - Device {m} of Type {t} reported
that a Station has been DeInserted from Board {I
1}, Port Group {I 2}, Port {I 3}. - (event [{e}])
No probable cause message.
Table 4-1. TRBMIM Events and Alarms (Sheet 14 of 23)
System Event Log Message
Source and Text
Alarm View Probable Cause Message
Source and Text