Specifications

TRMM/TRMMIM Events and Alarms
Event and Alarm Messages
4-20
TRMM/TRMMIM
Management Module Guide
CsEvFormat/Event0042023c
{d “%w- %d %m-, %Y - %T”} - RING
SPEED FAULT - Device {m} of Type
{t} reported that Board {I 1}, Port
Group {I 2}, Port {I 3} has entered the
Ring Speed Fault State. - (event [{e}])
No probable cause message.
CsEvFormat/Event0042023d
{d “%w- %d %m-, %Y - %T”} - RING
SPEED RAULT CLEARED - Device
{m} of Type {t} reported Board {I 1},
Port Group {I 2}, Port {I 3} has left the
Ring Speed Fault State. - (event [{e}])
No probable cause message.
CsEvFormat/Event0042023e
{d “%w- %d %m-, %Y - %T”} - RING
SPEED RAULT CLEARED - Device
{m} of Type {t} reported Board {I 1},
Port Group {I 2}, Port {I 3} has left the
Ring Speed Fault State. - (event [{e}])
No probable cause message.
CsEvFormat/Event0042023f
{d “%w- %d %m-, %Y - %T”} - TR
TPIM INSTALLED - Device {m} of
Type {t} reported a TPIM was
inserted on Board
{I 1}, Port Group {I 2}, Port {I 3}.
- (event [{e}])
No probable cause message.
CsEvFormat/Event00420240
{d “%w- %d %m-, %Y - %T”} -
NEIGHBOR NOTIFICATION
FAILED - Device {m} of Type {t}
reported that neighbor notification
process has not completed on Ring {I
1}. - (event [{e}])
No probable cause message.
CsEvFormat/Event00420241
{d “%w- %d %m-, %Y - %T”} - FAULT
RECOVERY OSCILLATION - Device
{m} of Type {t} reported that Ring {I
1} is oscillating. (event [{e}])
CsPCause/Prob00420241
FAULT RECOVERY OSCILLATION
SYMPTOMS:
The ring is oscillating. Oscillation occurs when
the ring fails a short time after recovery.
Table 4-1. TRMM/TRMMIM Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause Message