Specifications

9031074 E5 Event and Alarm Messages
4-15
TRMM/TRMMIM Events and Alarms
CsEvFormat/Event0042022a
{d “%w- %d %m-, %Y - %T”} -
STATION REMOVE FAILURE -
Device {m} of type {t} reported that
station {X 2} could not be removed
from Ring {I 1} after three attempts.
(event [{e}])
CsPCause/Prob0042022a
RING SECURITY BREACH - STATION
REMOVE FAILURE
Unauthorized station has attempted and
succeeded in attaching itself to the ring. After
3 consecutive tries, the station was not
successfully removed from the ring.
CsEvFormat/Event0042022b
{d “%w- %d %m-, %Y - %T”} - RING
SECURITY BREAK- Device {m} of
type {t} reported that Token Ring
Station Port was removed during a
security recover. Board {I 1}, Port
Group {I 2}, Port {I 3}. (event [{e}])
No probable cause message.
CsEvFormat/Event0042022c
{d “%w- %d %m-, %Y - %T”} - PORT
REMOVED DURING FAULT
RECOVERY - Device {m} of Type {t}
reported that Board {I 1}, Port Group
{I 2}, Port {I 3} was removed from the
Ring during a Fault Recovery
Condition. (event [{e}])
CsPCause/Prob0042020c
PORT REMOVED DURING FAULT
RECOVERY SYMPTOMS:
A port was removed from the ring during a
fault recovery condition.
PROBABLE CAUSES:
1) Bad cable connected to removed port.
2) Device connection is bad at other end of the
cable.
RECOMMENDED ACTIONS:
1) Check cable connected to removed port.
2) Check device connection at other end of the
cable.
3) After problem is resolved, enable the
removed port.
CsEvFormat/Event0042022d
{d “%w- %d %m-, %Y - %T”} - PORT
GROUP REMOVED DURING
FAULT RECOVERY - Device {m} or
Type {t} reported Board {I 1} Port
Group {I 2} was Bypassed. - (event
[{e}])
No probable cause message.
Table 4-1. TRMM/TRMMIM Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause Message