Specifications

TRMM/TRMMIM Events and Alarms
Event and Alarm Messages
4-14
TRMM/TRMMIM
Management Module Guide
CsEvFormat/Event00420226
{d “%w- %d %m-, %Y - %T”} -
BEACON STATE - Device {m} of type
{t} reported that Beacon Type {I 8}
has been detected on Ring {I 1} from
station {T string 2}, address {X 3}.
The Upstream Neighbor Station is {X
4}, Board {I 5}, Port Group
{I 6}, Port {I 7}. (event [{e}])
CsPCause/Prob00420226
BEACON STATE SYMPTOMS:
A station attached to this device has detected a
new beacon on the ring while the ring was in
operational state.
PROBABLE CAUSES:
1) The cable between this station and its
upstream neighbor.
2) The token ring card in the upstream
neighbor station is bad.
3) This station’s token ring card is bad.
RECOMMENDED ACTIONS:
1) Check the cable between this station and its
upstream neighbor.
2) Check the token ring card in the upstream
neighbor station.
3) Check this station’s token ring card.
CsEvFormat/Event00420227
{d “%w- %d %m-, %Y - %T”} -
BEACON STATE CLEARED -
Device {m} of type {t} reported that
the Last Beacon on Ring
{I 1} has been cleared. (event [{e}])
No probable cause message.
CsEvFormat/Event00420228
{d “%w- %d %m-, %Y - %T”} -
STATION ADDED - Device {m} of
type {t} reported that Station {X 2}
has been added to the Allowed
Station List. (event [{e}])
CsPCause/Prob00420228
RING SECURITY BREACH - STATION
ADDED
Unauthorized station has become attached to
the ring.
CsEvFormat/Event00420229
{d “%w- %d %m-, %Y - %T”} -
STATION REMOVED - Device {m} of
type {t} reported that station {X 2} on
Ring {I 1} has been removed from the
Allowed Station List. (event [{e}])
CsPCause/Prob00420229
RING SECURITY BREACH - STATION
REMOVED
Unauthorized station has attempted to attach
itself to the ring. Station was successfully
removed from the ring.
Table 4-1. TRMM/TRMMIM Events and Alarms (Continued)
Message in the Event Log Alarm View Probable Cause Message