Specifications

9031074 E5 Configuration Views
3-19
Token Ring Isolating Errors View
This button allows you to set a filter affecting the stations displayed in the
table. You select an attribute to filter against by clicking one of the column
heading buttons.
This button allows you to sort the stations displayed in the table. You select an
attribute to sort the table with by clicking one of the column heading buttons.
Station Address
The MAC address of the station to which this information pertains.
Station Name
The ASCII name assigned to this station.
Line
The number of line errors that this station has detected on the ring.
Burst
The number of burst errors that this station has detected on the ring.
A/C
The number of address/copied errors that this station has detected on the ring.
Abort
The number of abort sequences that this station has sent.
Internal
The number of internal errors that this station has detected.
This button opens the Station Detail view, which is described later in this
chapter.
This button opens the Station Alarms dialog box, which is described later in
this chapter.
This button allows you to remove the selected station from the ring.
Set/Clear Filter
Sort Up/Sort Down/Un-Sort
Station Detail
Station Alarms
Remove Station