Specifications

802.5 Station Table View
Configuration Views
3-16
TRMM/TRMMIM
Management Module Guide
This button opens the Station Alarms dialog box, which is described later in
this chapter.
This button allows you to remove the selected station from the ring.
802.5 Station Table View
This view displays a Station Table containing information for all stations on
the ring, buttons to manipulate the information in the table, and buttons to
access other views. The station that is the active monitor will be marked (*) to
distinguish it from the other stations in the list. You can access this view by
clicking on the Detail button in the Performance view for the LAN_802_5
model containing the TRMM/TRMMIM, if the TRMM/TRMMIM within the
LAN is the monitoring point. The information displayed by this view is much
the same as the Cabletron Token Ring Station Table view, providing the
following information and buttons:
This button updates the contents of the Station Table.
This button affects the display of statistical information. Selecting Totals
displays the statistics as totals since the TRMM/TRMMIM was initialized.
Selecting Deltas displays the difference between the current value and the
value at the time of the last update. The button displays the format currently
selected.
This button affects the display of the station addresses, toggling the format
between MAC (Physical) and Canonical (Ethernet). The button displays the
format NOT currently selected.
This button allows you to set a filter affecting the stations displayed in the
table. You select an attribute to filter against by clicking one of the column
heading buttons.
Station Alarms
Remove Station
Update
Totals/Deltas
MAC/Canonical
Set/Clear Filter