Specifications

9031074 E5 Configuration Views
3-13
Module Configuration View
Module Configuration View
You can access this view from the Logical Device view by clicking on one of the
managed module icons and selecting Module Configuration from the Icon
Subviews menu. This view notifies you if someone has logged into your ports
at an incorrect speed and provides the following information:
Module
The number of the module this ring port is on.
Module Name
Provides a descriptive name of the module.
Module Mode
Displays the mode, Management, Auto or Unknown.
Module Ring Speed
Displays the speed at which the module is configured to operate.
Module Speed Fault
Displays the ring speed fault on the module, if applicable. If the module
cannot detect the speed faults, then the value NotSupported is displayed.
Module Speed Fault Location
Displays the last ring speed fault detection circuits to detect the fault, if there
was one. On modules where the speed fault cannot be detected, the value
NotApplicable is displayed.
Module Port Configuration
This section of the Module Configuration view allows you to enable/disable
ports and displays the number of enabled ports.
Station Ports On Out Of
The total number of enabled station ports on the addressed module.
Ring Ports On Out Of
The total number of enabled ring in/ring out ports in this port group.
Ports Operational Out Of
The total number of operational ports on the addressed module.
Enable All Station Ports
This button allows you to enable all the station ports in this port group by
setting the value to Enable. The default value is NoEnable.
Enable All Ring Ports
This button allows you to enable all the ring ports in this port group by setting
the value to Enable. The default value is NoEnable.