Specifications

Physical Device View
Device Views
2-12
TRMM/TRMMIM
Management Module Guide
Ring In/Out Port Icon Description
The Logical Ring In/Out Port Icons consist of two areas providing information
pertaining to the ring in/out ports (refer to Figure 2-5). These areas provide
the following information:
Ring Label
Identifies the port as RI (Ring In) or RO (Ring Out). Double-clicking on this
area opens the Port Notes facility for the port.
Ring Port Status
The status of the ring in/out port, as follows:
ACT (Active) - Link, Port EnabledGreen
ACT (Active) - Link, Port DisabledBlue
WRAP - No Link, Port DisabledBlue
WRAP - No Link, Port EnabledRed
INIT (Initializing) Gray
Double-clicking on this area opens the Enable/Disable Ring In/Out Port view,
which allows you to toggle between enable and disable for this ring.
Physical Device View
The Physical Device view provides a graphical representation of the TRMM/
TRMMIM and the modules being managed within the chassis as shown in
Figure .
Accessing the Physical Device View
Access the Physical Device view by using one of the methods described in the
beginning of this chapter. Figure 2-6 provides an example of a TRMM/
TRMMIM Physical Device view.