SmartSwitch 9000 9H423-26 Local Management Appendix 9032227-01
Appendix 9H423-26 Module Specific Information Introduction This appendix contains local management information that is specific to the 9H423-26 Fast Ethernet Switch Module. The 9H423-26 Switch Module has 26 ports: • • 24 ports (two fixed RJ21 connectors) 2 ports (two fixed MMF SC connectors) This module can operate in either full duplex or half duplex mode. Auto-negotiation provides support for 10 Mbps and 100 Mbps speeds at both half and full duplex.
9H423-26 Module Specific Information Module Interfaces The 9H423-26 Fast Ethernet Switch Module has 31 interfaces. Table 1 lists the identifying number, name, and description of each interface. Table 1.
9H423-26 Module Specific Information Table 1.
9H423-26 Module Specific Information Port Configuration Screen The 9H423-26 Port Configuration Screen (Figure 1), displays configuration information about each port on the module (one port at a time). SmartSwitch 9000 Local Management Port Configuration Module Name: 9H423-26 Slot Number: 1 Firmware Revision: 01.00.00 BOOTPROM Revision: 01.00.
9H423-26 Module Specific Information Port Configuration Screen Fields The following information briefly explains each Port Configuration Screen field. Slot # (Modifiable) Indicates the slot that the board occupies in the chassis. Port # (Read-only) Indicates the current port for which statistics are displayed.
9H423-26 Module Specific Information Operating Full Duplex 100 Mbps Fast Ethernet over two strands of multimode fiber cable. Desired Operation Mode (Toggle) Displays one of the following values: • • • • • • • Auto-Negotiation 10Base-T manual 10Base-TFD manual 100Base-TX manual 100Base-TXFD manual 100Base-FX manual 100Base-FXFD manual Only the modes that the device is capable of using are displayed. The module defaults to auto-negotiation.
H423-26 Module Specific Information Displaying Configuration Information for a Different Port To display configuration information for a different port: 1. Use the arrow keys to highlight the Port # field at the bottom of the Port Configuration Screen. 2. Press the Space Bar to increment (or press the Delete key to decrement) the port number. 3. Press the Return key (neither the read-only Port # field nor the configuration information will change until you press the Return key).
9H423-26 Module Specific Information Port Statistics Screen The 9H423-26 Port Statistics Screen (Figure 2), displays statistical information for each port (one port at a time). SmartSwitch 9000 Local Management Port Statistics Module Name: 9H423-36 Slot Number: 1 Firmware Revision: 01.02.X3 BOOTPROM Revision: 01.00.
9H423-26 Module Specific Information Port Statistics Screen Fields The following information briefly explains each Port Statistics Screen field. Port # (Read-only) Indicates the current port for which statistics are displayed. Bytes (Read-only) Displays the number of bytes transmitted and received. Frames (Read-only) Displays the number of frames transmitted and received. Total Errors (Read-only) Displays the total number of errors on this port.
9H423-26 Module Specific Information Link Status (Read-only) Displays one of the following values: • • • Link No Link N/A Port Type (Read-only) Displays one of the following values: • • MMF SC RJ21 Admin Status (Read-only) Indicates the status of the selected port. Possible values are Enabled and Disabled. Application (Read-only) Displays Bridging, indicating that the port is operating as a bridge with a high-speed backbone connection.
9H423-26 Module Specific Information Displaying Statistics for a Different Port To display statistics for a different port: 1. Use the arrow keys to highlight the Port # field at the bottom of the Port Statistics Screen. 2. Press the Space Bar to increment (or press the Delete key to decrement) the port number. 3. Press the Return key (neither the read-only Port # field, nor the statistics will change until you press the Return key).
9H423-26 Module Specific Information 12
