Installation guide

Appendix A: Specifications
A-2 SSR-600 Installation Guide
A.1.1 Console Port
The RJ45 labled “console” on the front panel of the SSR-600 is used to
access the Command Line Interface (CLI). Refer to the appropriate
software manual for details. See Related Manuals in the Introduction.
A.1.2 Fast Ethernet RJ45 Pinout
The two RJ45s labeled Ethernet 1 and Ethernet 2 have the following
pinout:
Table 1-1 Console Port Connector Pinout
Pin Function
1 Transmit Data
2 Data Carrier Detect
3 Data Set Ready
4 Receive Data
5 Ground
6 Data Terminal Ready
7 Request to Send
8 Clear to Send
Table 1-2 Fast Ethernet RJ45 Pinout
Pin Function
1 Receive +
2 Receive -
3 Transmit +
4 Not used
5 Not used
6 Transmit -
7 Not used
8 Not used