Installation guide

Introduction
xvi SSR-600 Installation Guide
Chapter 3, Installation , provides detailed instructions for connecting the
SSR-600 to a network.
Chapter 4, Troubleshooting, Switches, and LED Indications , provides
detailed troubleshooting tips using the LANVIEW LEDs on the SSR-600,
along with hardware information.
Appendix A, Specifications , contains information on functionality and
operating specifications, regulatory compliance, connector pinouts,
environmental requirements, and physical properties.
SSR-600 FEATURES
The SSR-600 is an access device that provides Ethernet Local Area
Network (LAN) connectivity via two Fast Ethernet ports, and offers
high-speed Wide Area Network (WAN) access to remote sites via two
Sliding WAN Physical Interface Modules (SWPIMs).
Refer to the appropriate Cabletron Systems software manual for
information on supported WAN protocols and how to configure the
SSR-600 using software.
The SSR-600 can be remotely managed with a third party SNMP
compliant network management system.
OPTIONAL FEATURES
Optional features for the SSR-600 include:
• Rack mounting: The SSR-600 can be installed in a 19-inch rack with
the optional mounting bracket kit (Cabletron part number
SSR-600-RCK-KIT). Refer to Chapter 3, Installation , for rack
mounting instructions.
• SSR-600-ECM auxiliary card. Performs encryption and compression.
• SWPIMs: Supports Sliding WAN Physical Interface Modules
(SWPIMs), including the SWPIM-T1, the SWPIM-E1, and the
SWPIM-SY. Check the Release Notes for further information on
available SWPIMs.