Specifications

Device Management Page 49 SmartSwitch 9000/9500 Series
Performance Views
This section introduces the Performance view. For details concerning this view, refer to the SPECTRUM Views
documentation.
Performance views display performance statistics
in terms of a set of transmission attributes, e.g.,
cell rates, frame rates, % error, etc. A typical view
is shown in Figure 19. The instantaneous
condition of each transmission attribute is
recorded in a graph. The statistical information
for each attribute is presented in the adjacent
table.
Generally, you determine performance at the
device level through Performance views accessed
from the Device and Application icons. You
determine performance at the port/interface level
through Performance views accessed from
Interface icons.
Figure 19: Performance View
Note:
Note:
When modeling an SFSmartcell
(9A6XX-XX) the model represents the
entire switch (i.e. all 9A6XX-XX).
Therefore, the Performance views
statistics are calculated from the sum
of all statistics on each of the 9A6XX-
XX blades.
Model Name of type 9E133_08 of Landscape VNMHost: Primary
Log
100.0
10.00
1.00
0.10
0.01
0
0
0:40:0
0:30:0
0:20:0
NOW
Average
Peak Value
%Delivered
%Forwarded
%Transmit
%Error
%Discarded
Detail
Graph Properties
Scroll to Date-Time
Help
File
View Tools Bookmark
Model Name
Contact
Description
Location
Network Address
Primary Application
Sys Up Time
Manufacturer
Device Type
Serial Number