Specifications

Device Management Page 42 SmartSwitch 9000/9500 Series
Device Topology View
This section describes the Device Topology view available for models of the SmartSwitch 9000/9500 devices.
Access: From the Icon Subviews menu for the Device
icon, select Device Top.
The Device Topology view (Figure 14) shows the
connections between a modeled device and other
network entities. The lower panel of the view uses
Interface icons to represent the device’s serial,
network, and I/O ports. These icons provide the
same information and menu options as those in
the Device View (Page 20). If a device is connected
to a particular interface, a Device icon appears on
the vertical bar above the Interface icon along
with an icon representing the network group that
contains the device.
Refer to the SPECTRUM Views documentation for
details on Device Topology view. .
Figure 14: Device Topology View
File View HelpTools
1
Ethernet
0:0:1D:F:FD:B6
ei0
0.0.0.0
ON
2
AT M
0:0:1D:F:FD:B6
A2
0.0.0.0
ON 3
AT M
0:0:1D:F:FD:B6
CPU
0.0.0.0
ON
XYZ_Mxxx
Model Name
Bookmarks
SpectroGRAPH: Device Topology: Model Name
Graphic of
<manufacturer>
Device
Model Name of type Model Type of Landscape node: Primary